My Board
Refresh History
  • Read the rules
  • xhenon: Tukso kay melissa
    November 19, 2024, 07:10:50 AM
  • kenchi: Tagalog
    November 19, 2024, 06:49:41 PM
  • spongeboobs: Tagalog
    November 21, 2024, 02:11:10 PM
  • varithmas: tagalog
    November 24, 2024, 10:42:31 AM
  • arjohn28: Ang Tutor
    November 26, 2024, 01:44:29 PM
  • inboxx21: Mommy ni bunso
    November 29, 2024, 06:18:07 AM
  • ezon: Sec
    November 29, 2024, 10:52:36 PM
  • ashketlon: Dominique
    November 30, 2024, 03:36:28 AM
  • djcarloman: Lonely wife Roxanne
    November 30, 2024, 09:06:03 AM
  • rheedan22: bagong ligo
    November 30, 2024, 05:37:26 PM
  • d4rkalssed: sando
    December 01, 2024, 01:13:47 PM
  • xxxtyphoonn: Lonely wife
    December 01, 2024, 01:17:42 PM
  • chie: Delete
    December 02, 2024, 04:33:55 AM
  • creepshow: Dolls and braces
    December 02, 2024, 05:10:32 PM
  • abatekagigsters: Salamat sa pulis
    December 04, 2024, 03:15:36 PM
  • 0bserver: jaca
    December 04, 2024, 07:08:46 PM
  • ungg0y: hashtag
    December 05, 2024, 03:15:05 PM
  • josephUNO: Quid pro quo
    December 07, 2024, 03:44:19 PM
  • josephUNO: Quid pro quo
    December 07, 2024, 03:44:37 PM
  • luciouschemz: Ako si papa at iba pa
    December 07, 2024, 07:40:24 PM

New Bridge Design Improves Earthquake Resistance

fayt · 4 · 5227

0 Members and 1 Guest are viewing this topic.

Offline fayt

  • Global Moderator
  • Hero Member
  • *
  • Simple guy with below sea level average looks
on: July 05, 2014, 08:01:37 PM


Researchers have developed a new design for the framework of columns and beams that support bridges, called "bents," to improve performance for better resistance to earthquakes, less damage and faster on-site construction.

The faster construction is achieved by pre-fabricating the columns and beams off-site and shipping them to the site, where they are erected and connected quickly.

"The design of reinforced concrete bridges in seismic regions has changed little since the mid-1970s," said John Stanton, a professor in the Department of Civil and Environmental Engineering at the University of Washington, Seattle, who developed the concept underlying the new design. The team members include professorMarc Eberhard and graduate research assistants Travis Thonstad and Olafur Haraldsson from the University of Washington; and professor David Sanders and graduate research assistant Islam Mantawy from the University of Nevada, Reno.

Research findings are included in a paper being presented during Quake Summit 2014, the annual meeting for the National Science Foundation's George E. Brown, Jr. Network for Earthquake Engineering Simulation, a shared network of laboratories based at Purdue University. This year's summit is part of the 10th U.S. National Conference on Earthquake Engineering on July 21-25 in Anchorage, Alaska.

Until now the majority of bridge bents have been made using concrete that is cast in place, but that approach means time is needed for the concrete to gain strength before the next piece can be added. Pre-fabricating the pieces ahead of time eliminates this requirement, speeding on-site construction and reducing traffic delays.

"However, pre-fabricating means the pieces need to be connected on-site, and therein lies a major difficulty," Stanton said. "It is hard enough to design connections that can survive earthquake shaking, or to design them so that they can be easily assembled, but to do both at once is a real challenge."

Moreover, the researchers have achieved this goal using only common construction materials, which should smooth the way for owners and contractors to accept the new approach, he said.

An important feature of the new system is that the columns are pre-tensioned.

"A good analogy is to think of a series of a child's wooden building blocks, each with a hole through it," Stanton said. "Stack them on top of one another, put a rubber band through the central hole, stretch it tight and anchor it at each end. The rubber band keeps the blocks squeezed together.  Now stand the assembly of blocks up on its end and you have a pre-tensioned column. If the bottom of the column is attached to a foundation block, you can push the top sideways, as would an earthquake, but the rubber band just snaps the column back upright when you let go."

This "re-centering" action is important because it ensures that, directly after an earthquake, the bridge columns are vertical and not leaning over at an angle. This means that the bridge can be used by emergency vehicles in the critical moments immediately following the earthquake.   

"Of course, the real bridge columns do not contain rubber bands, but very high-strength steel cables are used to achieve the same behavior," Stanton said.

To keep the site operations as simple as possible, those cables are stressed and embedded in the concrete at the plant where the columns are fabricated. The columns also contain some conventional rebar, which is also installed in the fabrication plant.

The technology was pioneered in the building industry in the 1990s but is now being adapted for use with bridges.

When the columns rock during an earthquake, they experience high local stresses at the points of contact, and without special measures the concrete there would crush. To counteract this possibility, the researchers protected the ends of the columns with short steel tubes, or "jackets," that confine the concrete, not unlike the hoops of a barrel, or the steel cap that ranchers use to protect the top of a fence-post while driving it into the ground.

"Cyclic tests of the critical connections have demonstrated that the system can deform during strong earthquakes and then bounce back to vertical with minimal damage," Stanton said.

source site: http://www.engineering.com/DesignerEdge/DesignerEdgeArticles/ArticleID/7922/New-Bridge-Design-Improves-Earthquake-Resistance.aspx
>>Dear teachers
Di porket pare pareho kami ng sagot, nagkopyahan na kami. May sagot ba na iba iba? Ano yun, originality?
----- Shin Chan


My Board

New Bridge Design Improves Earthquake Resistance
« on: July 05, 2014, 08:01:37 PM »

Offline polgas88

Reply #1 on: July 06, 2014, 05:56:49 AM
Using prefab is already being used by our const industry. Nakakatakot kung lumindol at masira lahat ng bldg.


Offline jamesbond

Reply #2 on: July 06, 2014, 07:25:22 AM
so high stranded tensioned cables was being used... Hmmm... thanks for sharing sir...


Sent from my 007 iPhone using Tapatalk


My Board

Re: New Bridge Design Improves Earthquake Resistance
« Reply #2 on: July 06, 2014, 07:25:22 AM »

Offline naruto789544

Reply #3 on: July 27, 2018, 01:53:16 AM
interesting.. hope there's more studies to this method...  :) :) :)


My Board

Re: New Bridge Design Improves Earthquake Resistance
« Reply #3 on: July 27, 2018, 01:53:16 AM »

 


* PT Social Groups

SimplePortal 2.3.7 © 2008-2024, SimplePortal