My Board
Refresh History
  • Read the rules
  • pinkpute21: Quid
    January 10, 2023, 08:44:28 AM
  • tsakiwaki: Tinuhig
    January 10, 2023, 07:12:38 PM
  • supermoymoy: Mapanghi
    January 11, 2023, 10:33:03 PM
  • jeypz: Dentist angela
    January 14, 2023, 06:10:37 AM
  • Jovil88: Sonnette
    January 14, 2023, 09:01:00 AM
  • fuentebella21: [link]
    January 14, 2023, 01:49:56 PM
  • lordzed: Bogart
    January 18, 2023, 10:48:39 AM
  • bogus: Resthouse
    January 18, 2023, 02:18:54 PM
  • bogus: Resthouse
    January 18, 2023, 02:19:09 PM
  • mrcomeback: Lebanon
    January 18, 2023, 07:40:26 PM
  • madokka: Alexa
    January 18, 2023, 08:04:51 PM
  • buddy_touch: Iyotin mo asawa ko
    January 19, 2023, 03:58:19 AM
  • icE_boaT: bitag
    January 20, 2023, 10:49:00 PM
  • fuentebella21: [link]
    January 21, 2023, 09:15:39 AM
  • SkilledSilverTongue: kamusta na kayo dito? madami ng ganap sa mga buhay natin. ingat kayo lagi.
    January 24, 2023, 12:02:29 PM
  • Kalikutero: Boss sana masundan na ito
    January 24, 2023, 03:43:51 PM
  • jhokere: Eighteen
    January 26, 2023, 01:30:13 AM
  • supermoymoy: we dong
    January 26, 2023, 04:12:49 PM
  • No Regrets: Asawa lynn
    January 27, 2023, 01:25:55 PM
  • fuentebella21: [link]
    January 29, 2023, 08:50:11 PM

Instrumentation and Control

0 Members and 1 Guest are viewing this topic.

Offline Jeydycee™

on: October 19, 2013, 04:31:18 AM
guys sinu Instrumentation and Control Engineers and Technician dito.. we can discuss everything and share our experience dito..

I'm an Instrumentation and Control Specilaist here in UAE and working sa isang Oil and Gas onshore Industry
http://www.pinoycyberkada.com/index.php?board=127.0
"BULALO"--- Di kagwapuhan bahagya, di kagandahan ang katawan pero......masebo at mataba naman ang utak...in short------> "BRAINY"


My Board

Instrumentation and Control
« on: October 19, 2013, 04:31:18 AM »

Offline manforest

Reply #1 on: October 21, 2013, 01:04:59 PM
naging subject ko lang eto instrumentation and control... pero technician ako.. sana nga makapag apply ako as instrumentation and control engineer


Offline ninyo

Reply #2 on: October 21, 2013, 01:32:46 PM
Pasali po. Nakakainggit naman pag engineer, purgramir lang kasi. Nakapag raket naman ako sa projects na gumagamit ng scada systems.







sent via tapatalk2
« Last Edit: October 21, 2013, 01:35:32 PM by ninyo »


My Board

Re: Instrumentation and Control
« Reply #2 on: October 21, 2013, 01:32:46 PM »

Offline ¿m☺ÿ

  • Elite Certified Member
  • Certified Member 4
  • *
  • If you want to be my friend, i'm just 1 PM away.
    • POTW
    • PTFM
    • Sagittarius
Reply #3 on: October 21, 2013, 06:17:48 PM
Nag-aral ako ng Instrumentation Technology sa Don Bosco Mandaluyong.... Hindi ko na nga lang naia-apply kasi Planning and Scheduling Engineer ang trabaho ko ngayon.


zzgundam

  • Guest
Reply #4 on: October 21, 2013, 08:29:30 PM
I took courses in instrumentation and control, as they are part of the curriculum for CoE. But it's not my specialty. I can help out a bit though, as I'm familiar with sensors and PLCs.


My Board

Re: Instrumentation and Control
« Reply #4 on: October 21, 2013, 08:29:30 PM »

Offline iceprince

  • Hero Member
  • *
  • it's not about the looks,it's in the moves!
    • PTFM
    • Virgo
Reply #5 on: October 22, 2013, 03:04:40 PM
ako nung college lang nga yan...hahaha

pero puede ako makatulong...nagbebenta kasi ako ng mga Level Switches at Transmitter...
Pili ka ng brand: Magnetrol, ORION, etc...hahaha
pero dito lang sa Philippines...
wala na akong commision sa ibang bansa eh...
 :P :P :P



Offline Jeydycee™

Reply #6 on: October 27, 2013, 06:56:24 AM
Nice to know na marami rin pala tayo dito.kahit na subject lang yung iba for sure makakatulong din tayo sa iba nating kasamahan.. next time pagmay problema ko sa field post ko dito..
thnaks guys!!good luck sa mga trabaho nyo ngayun..Be safe!
http://www.pinoycyberkada.com/index.php?board=127.0
"BULALO"--- Di kagwapuhan bahagya, di kagandahan ang katawan pero......masebo at mataba naman ang utak...in short------> "BRAINY"


Offline roman_talavera

Reply #7 on: November 15, 2013, 09:41:20 PM
ano ho ba ang scope of work ng isang Instrumentation and Control Engineer (IaCE) sa abroad? what basic knowledge do you need to shift from non-IaCE to IaCE?


Offline gah

Reply #8 on: November 25, 2013, 02:18:27 AM
scope ng work ng isang Instrumentation and Control engineer (ICE), depende sa mapapasukan mong company, kalimitan design kung nsa FEED, EPC, EPCM, or Process Control ka. pag Instrumentation and Control Technician (ICT) kalimitan nman nun ay nsa calibration ng instrument, sa mga calibration services company :-\


Offline phil_13

Reply #9 on: December 14, 2013, 12:29:26 PM
 :hi1:

Sali ako,,

I'd took instrumentation and control as my subject, but I never use it on my job.

Electrical Engineer nga po pala ako,.  :bye:


Offline ¿m☺ÿ

  • Elite Certified Member
  • Certified Member 4
  • *
  • If you want to be my friend, i'm just 1 PM away.
    • POTW
    • PTFM
    • Sagittarius
Reply #10 on: December 14, 2013, 04:50:39 PM
kung sa construction naman mapupunta sa abroad, instrumentation will be part of E&I discipline (Electrical and Instrumentation) related kasi ang dalawa regarding work... ang pagkakaiba lang is yung installation and calibration ng instrument, loop check and function check whereas ang electrical is more involve in electrical equipment such as motors, high pot testing, megger testing.

Both electrical and Instrumentation have common activities like cable laying(HV cable, MV cable, and LV cable) for electrical and (Instrument cable) for instrument; cable tray installation.


Offline Batanguenio

Reply #11 on: December 14, 2013, 06:05:25 PM
Sa construction ako nagwowork at sa Mechanical section ako. Sa company namin, part ng mechanical ang Instrumentation, like BMS/Scada. Yan mostly scope ng work namin pag dating sa Instrumentation. Mostly HVAC application namin sa InCE.


Offline interruptedz

Reply #12 on: December 14, 2013, 06:23:22 PM
ako instrumentation and control engr. graduate ng RTU. karamihan sa mga classmate ko nasa abroad.ako lang ata naiba ng industry.sa mga CNC machines ako :-)
pero nagwowork ako dati sa integrator ng siemens


Offline gah

Reply #13 on: December 31, 2013, 12:26:32 PM
halos lahat kc connected an instrumentation and control branch cia ng mga engr kaya cia nabuo in my opinion...
kung instrumentation sa mechanical mga PSV, safety vlaves, Control valves kc malalaki ang valves kya my pag ka mechanical cia tpos yun nga sbe ni bataguenio HVAC, mechanical kc an HVAC. Instr kc control system ginamet eh BMS\SCADA usualy kc mga software s Instr...
yun kay imoy instr sa electrical oo gnun nga related dn kc cia, cimpre power ng instrument
kung instr sa electronics naman usualy lahat ngaun ng instrument ay electronics na, tpos yun mga communication nia ng instrument hangng Cntrol room signal
sa chemical instrumentation, measuring instrument analytical kalimitan online, grab sampling kc an chemical engr etc..
nsa maintenance nga pla ang work ko, instrumentation engr.


Offline ¿m☺ÿ

  • Elite Certified Member
  • Certified Member 4
  • *
  • If you want to be my friend, i'm just 1 PM away.
    • POTW
    • PTFM
    • Sagittarius
Reply #14 on: December 31, 2013, 03:36:34 PM
A bit of history ng Instrumentation

Actually, ang instrumentation is previously known as Electromechanical kasi combination talaga siya ng electrical, mechanical, at electronics. Sa Pilipinas if I'm not mistaken eh nagkaroon lang proper engineering course noong year 2000 sa Rizal Tech. Univ(RTU) formerly known as Rizal Tech College (RTC). But Instrumentation really start as a Technical course sa Don Bosco Tech College(DBTC) then adapted by Meralco Foundation, TUP, and RTC, and maybe some other school na hindi ko alam and of course TESDA have a short term course for this minimum of 6 months.

I know this kasi noong magkaroon ng Instrumentation and Controls Society of the Philippines we tried to get our school a membership, I was the vice president of Instrumentation society in our school then... ang opisina pa noong time ko ng ICSP eh sa UP Diliman. Then nagkaroon ng official gathering ng lahat ng member sa CCP complex for the annual convention i think its 1997 or basta late 1900's. This is the time when all members who wants to be certified as Instrumentation Tech and Engineers undergo series of seminars and then exams. Kasi wala pang board and Instrumentation Engineering at wala pang course ng Engineering, and hanggang ngayon i think wala pa ring board but it's on the process though mayroon ng Engineering course sa RTU . During this convention also nagkaroon ng very first Quiz bee for all the school na member ng ICSP...the very first quiz bee  was won by RTC, 2nd is Meralco and third is DBTC. And i'm one of the member ng DBTC, was really a close fight,  bakit kasi may points ang formula kahit mali ang sagot(bitter...hehehe)

Anyway, as far as i know...instrumentation is a course just like Benjamin Franklin who is famous in the saying "Jack of all trades but master of none!". This is really true kasi, Instrumentation really covers a lot of field basta my controls then instrumentation is needed kaya patok ito sa mga planta may it be during construction or operation, like sir gah is saying about BMS/SCADA, PLC, control valves, etc. At kung well verse ka sa instrumentaion, reading a P&ID and process flow diagram is easy. It's really a challenging field of work kasi it also deals with logic kung control and process ang pag-uusapan, sayang nga at hindi ko na ito napapractice masyado kasi nasa planning and scheduling na ang field of work ko.
 


My Board

Re: Instrumentation and Control
« Reply #14 on: December 31, 2013, 03:36:34 PM »

 


* PT Social Groups

SimplePortal 2.3.7 © 2008-2023, SimplePortal